FlexStyle Domed

FlexStyle® Domed brings a unique bubble effect to the table. This type provides a 3D appearance and offers metallic, non-metallic, matte, satin, and chrome finishes.

FlexStyle® is perfect for hard goods, outerwear, and heavy-duty garments with its heat-sealing and pressure-sensitive applications to adhere to various surfaces.

Don’t forget your FlexStyle® Silicone Pad to protect your emblem and garments!

Best For: Fabric, Glass, Wood, Metal, Plastic

Emblem Size Limits

Minimum: 0.5” x 0.5”
Maximum: 5.75” x 5.75”

Thickness: 1.5mm (+/- 0.5mm)

Color

• Accepts RGB, CMYK, and Pantone color codes
• Color match is only available for Pantone Coated color codes
• Neon, glitter, and reflective colors are not available

Backing

• Low melt heat seal
• Pressure-sensitive

Limitations

Low melt - Not recommended for use on materials that may be heat sensitive (ex: some nylons, silk, some plastics, leather, wool, fleece, etc.) or for weather-treated materials, due to chemicals used that do not allow the emblems to adhere properly.
Pressure-sensitive - Recommended application is on flat, non-textured surfaces, including glass, plastic, wood, and metal. Not recommended for application on surfaces that may contain an oil finish, such as silicon, Teflon™, rough fabrics, or outdoor goods.

Textures

Textures are predicated by each individual design. If product has textured area bigger than 50%, it becomes automatically FlexStyle® Flat.

Washing Information

FlexStyle® emblems will withstand at least 25 domestic washing machine cycles at 104°F max.

Shelf Life

One year shelf life before applying (room temperature-controlled environment).

Note: World Emblem encourages our clients to test applications of our products onto their garments. World Emblem is not responsible for damages resulting from washing and laundering of any product purchased.

Revised 11.26.24

Application Instructions

Pressure-sensitive 

1. Clean application area with rubbing alcohol
2. Remove paper backing, press emblem firmly on desired location
3. Peel off clear top carrier from the emblem

LOW MELT BACKING WITH A 360 IQ™ HAT HEAT PRESS - HATS

• Top Temperature: 275°-285° F
• BottomTemperature: 315°-320° F
• Pressure: 50-70 PSI
• Preheat: N/A
• Dwell Time: 15-18 seconds
• Instructions: Place hat on heat press, leaving out the inner layer of the cap. Remove garment from heat press and remove the clear top carrier from emblem once cooled. Use a FlexStyle® Silicone Pad to protect the patch.

LOW MELT BACKING WITH TOP HEAT & BOTTOM HEAT - GARMENTS

• Top Temperature: 275°-285° F
• BottomTemperature: 270°-280° F
• Pressure: 50-70 PSI
• Preheat: N/A
• Dwell Time: 15-18 seconds
• Instructions: Remove garment from heat press and remove the clear top carrier from emblem once cooled. Use a FlexStyle® Silicone Pad to protect the patch.

LOW MELT BACKING WITH A TOP HEAT PRESS - GARMENTS

• Temperature: 355°-365° F
• Pressure: 40-50 PSI
• Preheat: 15-20 seconds
• Dwell Time: 15-20 seconds
• Instructions: Remove garment from heat press and remove the clear top carrier from emblem once cooled. Use a FlexStyle® Silicone Pad to protect the patch.

Disclaimer

World Emblem recommends testing the best combination of heat seal parameters before application. World Emblem is not liable for any damages to garments during the application process.

Note: Please check out www.youtube.com/worldemblem for step-by-step instructions for applying our apparel decorations.

Pricing

Using the drop-downs above, you can find the approximate price per item, based on the emblem size and quantity ordered.

To determine the size of your emblem, use the following formula:
Size = Width + Height / 2

Price Includes

• All finishes
• Heat seal or pressure-sensitive backing

Add-ons

• 25% increase for Velcro backing

Electronic Proof

A digital proof via email is available in 1 day. Edits are allowed.

Set-up Charges

One-time mold charge and artwork fees (includes up to 5 samples and overnight shipping).

• Electronic Simulation: $25
• Up to 4.00”: $150
• 4.01 - 6.00”: $200

Production Time

Samples will take 2 days plus shipping. Production time will take 4 day plus shipping on an order up to 2,500 pieces. Add 1 day per 2,500 pieces.

Click HERE to view our Products & Services Turnaround Times table for your convinience. 

NOTE: All turnaround times are subject to change. Larger orders may result in additional business days for production. Orders received after the cut-off time will be considered as received the next working day.

Safety and Sustainability

Proposition 65 requires businesses to provide warnings about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.  These chemicals can be in the products in homes or workplaces, or that are released into the environment.

The CPSIA strengthened children's product safety by establishing critical safety and traceability requirements.

Primarily, CPSIA regulations enforce:

• Rigorous restrictions on phthalates

• Rigorous lead restrictions

• Requires acceptable levels for several substances common in most consumer products, especially those designed for children, ages 0-12.