Digitally printed static-cling window stickers. They cling securely to the inside of a window using static. Easily removed with no sticky residue.
- Clings to the window using static
- Easy to remove with no residue
- Apply to the inside of the window
- White, colored or clear background
Our Window Stickers are supplied in sheet format, not on a roll.
Window Stickers (also referred to as static cling window stickers) don't use an adhesive to "stick" to the window, they use static. This means they will "stick" firmly to the window but can be removed and repositioned without leaving any sticky residue. These are great for car window stickers, shop window stickers, office window stickers and much more.
Window Stickers are applied to the inside of the window. When designing your Window Stickers you can choose from "visible from the outside" (the most common use for car window stickers or shop window stickers) or "visible from the inside". You choose from a gloss clear vinyl (your design will have a clear background) or a gloss white vinyl to get a white background.
Need clear stickers with a sticky adhesive rather than static cling? See our clear stickers.
All of our window stickers have the following benefits:
- Full color, high resolution digital printing
- Strong static cling adhesion
- Non-yellowing
- No setup or design fees
Window Sticker Suggested Application Instructions
Window Stickers are applied to the inside of the window. In most cases they are visible from the outside of the window, but if required you can choose for them to be visible from the inside when designing.
Step 1: It's very important to make sure that the inside surface of the window is clean and free of dust before trying to apply the sticker. We recommend using just water, but if you use a window cleaning solution, please ensure it has completely dried or evaporated before continuing.
Step 2: Carefully peel the window sticker from the sheet, trying not to touch the "sticky" surface underneath.
Step 3: Gently stick down one edge of the sticker (such as the right hand side). Run a squeegee (or a credit card wrapped in a paper towel) across the sticker (from right to left in this example) to prevent air from being trapped underneath the sticker.
Step 4: Once the sticker has been applied, check for any air bubbles beneath the vinyl. If air is trapped, use a squeegee (or a credit card wrapped in a paper towel) to push the air to the outside of the sticker. If this doesn't work, carefully remove the sticker and try again from Step 1.
Disclaimers
Please satisfy yourself that you are confident of how to apply your sticker on to your chosen surface before attempting application. Stickers International cannot be held responsible for a poor or failed application. Do not attempt to apply the stickers in very cold or very hot temperatures.
- How are the window stickers supplied? All of our custom stickers are supplied in an easy-to-peel sheet format. The sheets are 9.25 inches wide by 10 inches tall with a printable area for the location of the stickers which is 8.81 inches x 8.64 inches. They are not available on a roll or individually cut.
- Should I apply the window sticker to the inside or outside of the window? Our window stickers should be applied to the inside of the window. When you design on our website you will be able to choose from "read from the outside" and "read from the inside". Most people choose "read from the outside" as window stickers are typically applied to the inside of a shop window so customers outside the shop can read them.
- Can they be applied to curved windows? Our window stickers can be applied on lightly curved surfaces like some car windows, but they are not designed to be deformed in 3D.
- What is the difference between window stickers and clear stickers? Clear stickers use adhesive to stick to their substrate, but window stickers use static. This means that there is no sticky residue when you remove them and they can be reapplied, repositioned and reused.
- Can you print the window stickers in reverse? Our window stickers are printed in reverse by default, so when the sticker is applied to the inside of the window, the graphic is visible from the outside. In some cases customers want to apply the stickers to the inside of the window to be visible from the inside, so you can choose your preference when designing on our website.
